Removing and Inserting the PC Card
The slot labeled PC CARD on the Routing Engine faceplate accepts a Type I PC card, as defined in the PC Card Standard published by the Personal Computer Memory Card International Association (PCMCIA). You can also copy Junos OS from the Routing Engine onto a PC card, for example, to create a backup copy of upgrade software that you have obtained from Juniper Networks. Instructions for copying software to a PC card are available at the Juniper Networks Customer Support Center Web site (http://www.juniper.net/support); after logging in, navigate to the download page for Junos OS.
To remove and insert a PC card, perform the following procedures:
Removing the PC Card
The PC card is inserted in the slot labeled PC CARD in the Routing Engine faceplate. To remove the PC card (see Figure 1):
- Press the eject button located to the right of the PC card slot in the Routing Engine faceplate.
- When the PC card pops partially out of the slot, grasp the card and pull it straight out of the slot.
Figure 1: Removing the PC Card
Replacing the PC Card Adapter Flash Disk
The PC card is an adapter that holds a flash disk. To replace the flash disk (see Figure 2):
- If a flash disk is already inserted in the PC card adapter, slide the flash disk out of the adapter.
- Align the replacement flash disk with the adapter.
- Press the flash disk firmly all the way into the adapter.
Figure 2: Inserting the PC Card Flash Disk
Inserting the PC Card
To insert the PC card (see Figure 3):
- Orient the PC card with the Juniper Networks logo facing in the direction specified on the Routing Engine faceplate. Insert the card into the slot.
- Press the card firmly all the way into the slot.
Figure 3: Inserting the PC Card
