• Supported Platforms
• M7i Routers

• Related Topics
• Preventing Electrostatic Discharge Damage to an M7i Router
• M7i Chassis Description
• M7i Routing Engine Description
• Installing the Routing Engine in a M7i Router
• Maintaining the M7i Routing Engine

Removing an M7i Routing Engine

To remove a Routing Engine (see Figure 1):

1. Place an electrostatic bag or antistatic mat on a flat, stable surface.
2. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
3. Press and hold the offline button on the faceplate of the Routing Engine until the green ONLINE LED turns off, which takes about 5 seconds.
4. Loosen the thumbscrews securing the Routing Engine, using a Phillips screwdriver if necessary.
5. Grasp the handle and slide the unit about halfway out of the chassis.

   Caution: Be careful to slide the Routing Engine straight out of the chassis. Damage can result if it gets lodged because of uneven movement.

6. Place one hand under the Routing Engine to support it, slide it completely out of the chassis, and place it on the antistatic mat or in the electrostatic bag.