• Supported Platforms
• M7i Routers

• Related Topics
• M7i Chassis Description
• M7i Midplane Description
• Maintaining the M7i Routing Engine
• Inserting a SDRAM Module

Removing a SDRAM Module

The SDRAM modules are located on the top of the Routing Engine. To remove a SDRAM module:

1. Place an electrostatic bag or antistatic mat on a flat, stable surface.
2. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist and connect the strap to one of the ESD points on the chassis. Verify that the router is attached to a proper earth ground.
3. Remove the Routing Engine as described in Removing an M7i Routing Engine.
4. To release the SDRAM module, press the plastic ejectors on both sides of the module.
5. Grasp the SDRAM module, being careful not to touch any electrical components on the module, and firmly pull it out of the slot on the Routing Engine.
6. Place the SDRAM module on the antistatic mat or in the electrostatic bag.
7. Push the plastic ejectors to close the empty SDRAM module slot.