Technical Documentation

Preparing the SRX210 Services Gateway for Rack-Mount Installation

You can mount an SRX210 Services Gateway on four-post (telco) racks, enclosed cabinets, and open-frame racks.

Note: The SRX210 Services Gateway cannot be center-mounted in racks.

Table 1 provides the list of tasks you need to perform before installing the device.

Table 1: SRX210 Services Gateway Preinstallation Checklist for Rack-Mount Installation

Task	Additional Information
Verify that the site meets the requirements.	Site Preparation Checklist for the SRX210 Services Gateway
Verify that the racks or cabinets meet the specific requirements.	SRX210 Services Gateway Rack Requirements
Place the rack or cabinet in its permanent location, allowing adequate clearance for airflow and maintenance, and secure it to the building structure.	Clearance Requirements for Airflow and Hardware Maintenance of the SRX210 Services Gateway
Remove the services gateway chassis from the shipping carton.	Unpacking the SRX210 Services Gateway
Verify that you have the following parts available in your rack-mounting kit for the SRX210 Services Gateway: Rack-mounting brackets Mounting screws Power supply adapter tray with screws Adapter stopper bracket
Adjust the power supply adapter tray.	Adjusting the Power Supply Adapter Tray for the SRX210 Services Gateway for Rack-Mount Installation

Note: The rack-mounting kit is not shipped with the device and must be ordered separately.