- Related Topics
- Site Preparation Checklist for the SRX100 Services Gateway
- Unpacking the SRX100 Services Gateway
- Clearance Requirements for Airflow and Hardware Maintenance of the SRX100 Services Gateway
- SRX100 Services Gateway Rack Requirements
- Preparing the SRX100 Services Gateway for Desk-Mount Installation
- Preparing the SRX100 Services Gateway for Wall-Mount Installation
Preparing the SRX100 Services Gateway for Rack-Mount Installation
You can mount an SRX100 Services Gateway in four-post (telco) racks, enclosed cabinets, and open-frame racks.
 | Note: The SRX100 Services Gateway cannot be center-mounted in racks. |
Before mounting the SRX100 Services Gateway in a rack:
- Verify that the installation site meets the requirements described in Site Preparation Checklist for the SRX100 Services Gateway.
- Verify that the racks or cabinets meet the specific requirements described in SRX100 Services Gateway Rack Requirements.
- Place the rack or cabinet in its permanent location, allowing adequate clearance for airflow and maintenance, and secure it to the building structure. For more information, see Clearance Requirements for Airflow and Hardware Maintenance of the SRX100 Services Gateway.
- Remove the services gateway chassis from the shipping carton. For unpacking instructions, see Unpacking the SRX100 Services Gateway.
- Verify that you have the following parts available in
your rack-mounting kit for the SRX100 Services Gateway:
- Rack-mount tray
- Screws
| Note: The rack-mounting kit is not shipped with the device and must be ordered separately. |
