Preparing the SRX650 Services Gateway for Rack-Mount Installation
You can mount an SRX650 Services Gateway on four-post (telco) racks, enclosed cabinets, and open-frame racks. Center-mount racks are not supported.
Before mounting the SRX650 Services Gateway in a rack:
- Verify that the site meets the requirements described in Site Preparation Checklist for the SRX650 Services Gateway.
- Verify that you have the following parts available in
your rack-mounting kit for the SRX650 Services Gateway:
- Rack-mounting brackets
- Screws
- Verify that the racks or cabinets meet the specific requirements described in SRX650 Services Gateway Rack Size and Strength Requirements.
- Place the rack or cabinet in its permanent location, allowing adequate clearance for airflow and maintenance, and secure it to the building structure. For more information, see SRX650 Services Gateway Cabinet Airflow Requirements.
- Remove the gateway chassis from the shipping carton. For unpacking instructions, see Unpacking the SRX650 Services Gateway.
