Installing the Mounting Hardware for the SRX3600 Services Gateway
The specific mounting hardware used depends on the type of rack being utilized. Use the appropriate procedure steps to install the mounting hardware for your situation.
To install the mounting hardware:
- Locate the rack mount brackets in the accessory kit.
- Use the screws provided to secure the rack mount
brackets to the sides of the chassis:
- For a two-post rack, mount the brackets at the mid-mount holes, as shown in Figure 1.
- For a four-post rack, mount the brackets near the front edge of the chassis, as shown in Figure 2.
Figure 1: Attaching Mounting Hardware for Two-Post Rack
Figure 2: Attaching Mounting Hardware for Cabinet or Four-Post Rack
- For installation in a four-post rack or a cabinet, install the
support shelf on the rear posts, as shown in Figure 3.
Figure 3: Attaching Four-Post and Cabinet Support Shelf
