• Related Topics
• MX80 Power System Description
• Removing an MX80 AC Power Supply
• MX80 Router AC Power Specifications
• AC Power Circuit Breaker Requirements for the MX80 Router
• AC Power Cord Specifications for the MX80 Router
• Preventing Electrostatic Discharge Damage to an MX80 Router

Installing an MX80 AC Power Supply

To install an AC power supply (see Figure 1):

1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
2. Move the AC input switch next to the appliance inlet on the power supply to the off (O) position.
3. Using both hands, slide the power supply straight into the chassis until the power supply is fully seated in the chassis slot. The power supply faceplate should be flush with any adjacent power supply faceplate or blank installed in the power supply slot.
4. Attach the power cord to the power supply.
5. Attach the power cord to the AC power source, and switch on the dedicated customer site circuit breaker. Follow the instructions for your site.
6. Move the AC input switch next to the appliance inlet on the power supply to the on ( | ) position and observe the status LED on the power supply faceplate. If the power supply is correctly installed and functioning normally, the status LED lights green steadily.