• Downloads
• Connecting the SRX5800 Services Gateway to a Network for Out-of-Band Management    

• Related Topics
• Overview of Installing the SRX5800 Services Gateway
• Tools and Parts Required for SRX5800 Services Gateway Connections
• Connecting the SRX5800 Services Gateway to a Management Console or an Auxiliary Device
• Connecting an SRX5800 Services Gateway to an External Alarm-Reporting Device
• Connecting Network Cables to SRX5800 Services Gateway IOCs and Port Modules

Connecting the SRX5800 Services Gateway to a Network for Out-of-Band Management

To connect the Services Gateway Routing Engine to a network for out-of-band management, connect an Ethernet cable with RJ-45 connectors to the ETHERNET port on the Routing Engine. One Ethernet cable is provided with the services gateway. To connect to the ETHERNET port on the Routing Engine:

1. Turn off the power to the management device.
2. Plug one end of the Ethernet cable (Figure 2 shows the connector) into the ETHERNET port on the Routing Engine. Figure 1 shows the port.
3. Plug the other end of the cable into the network device.

Figure 1: Ethernet Port

Figure 2: Routing Engine Ethernet Cable Connector