- Related Topics
- Tools and Parts Required for SRX5600 Services Gateway Connections
- Overview of Installing the SRX5600 Services Gateway
- Connecting the SRX5600 Services Gateway to a Network for Out-of-Band Management
- Connecting an SRX5600 Services Gateway to an External Alarm-Reporting Device
- Connecting Network Cables to SRX5600 Services Gateway IOCs and Port Modules
Connecting the SRX5600 Services Gateway to a Management Console or an Auxiliary Device
To use a system console to configure and manage the Routing Engine, connect it to the appropriate CONSOLE port on the Routing Engine. To use a laptop, modem, or other auxiliary device, connect it to the AUX port on the Routing Engine. Both ports accept a cable with an RJ-45 connector. One serial cable with an RJ-45 connector and a DB-9 connector is provided with the services gateway. To connect a device to the CONSOLE port and another device to the AUX port, you must supply an additional cable.
To connect a management console or auxiliary device:
- Turn off the power to the console or auxiliary device.
- Plug the RJ-45 end of the serial cable (Figure 2 shows the connector) into the AUX port or CONSOLE port on the Routing Engine. Figure 1 shows the ports.
- Plug the female DB-9 end into the device's serial port.
Figure 1: Auxiliary and Console Ports
Figure 2: Routing Engine Console and Auxiliary Cable Connector
