Inserting the M40e PC Card
To insert the PC Card (see Figure 1):
- Orient the PC Card with the Juniper Networks logo facing in the direction specified on the Routing Engine faceplate. Insert the card into the slot.
- Press the card firmly all the way into the slot. Note that the PC Card slot might be located in a different position from that shown in Figure 1.
- Reinstall the rear component cover and tighten the thumbscrew
at each corner to secure it to the chassis. For complete instructions,
see Reinstalling the M40e Components into the Chassis.
Caution: To maintain proper airflow and provide electromagnetic shielding, do not operate the router without the rear component cover in place.
Figure 1: Inserting the PC Card
