Removing a JCS1200 Network Clock Filler
Figure 1 shows how to remove and install a network clock filler.
Figure 1: Removing and Installing a JCS1200 Network Clock Filler
To remove a network clock filler (see Figure 1):
- Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
- Pull the release handle to the open position. The network clock filler moves out of the bay approximately 0.25 in. (0.6 cm).
- Slide the network clock filler out of the bay.
