• Supported Platforms
• MX80 Routers

• Related Topics
• MX80 Site Preparation Checklist
• MX80 Installation Summary
• Unpacking the MX80 Router
• Installing the MX80 Chassis in the Rack

Moving the Mounting Brackets for Center-Mounting the MX80 Router

Two removable mounting brackets are attached to the mounting holes closest to the front of the chassis (see Figure 1). You can move the pair of brackets to another position on the side of the chassis for center-mounting the router.

To move the mounting brackets from the front of the chassis toward the center of the chassis (see Figure 2):

1. Remove the four screws at the top and bottom of the bracket.
2. Pull the bracket away from the chassis.
3. Align the bracket with the two sets of mounting holes located toward the center of the chassis.
4. Insert the four screws at the top and bottom of the bracket and tighten each partially.
5. Tighten the four screws completely.
6. Repeat the procedure for the other bracket.