Removing a JCS1200 MUX Card
Figure 1 shows how to remove and install a multiplexer (MUX) card.
Figure 1: Removing and Installing a JCS1200 MUX Card
To remove a MUX card (see Figure 1):
- Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
- Pull the release handle to the open position. The MUX card moves out of the bay approximately 0.25 inch (0.6 cm).
- Slide the MUX card out of the bay.
