• Download Software
• Research a Problem 
• Case Management 
• Contract & Product Management 
• Technical Documentation
  • Advanced Search
  • Documentation Archive
  • Documentation Bug Report
  • Enterprise MIBs
  • File Format Help
  • Glossary
  • Portable Libraries
• End-of-Life Products
• Contact Support
• Guidelines and Policies
• Security Resources

Installing Cage Nuts (If Needed) for M320 Four-Post Racks or Cabinets

For racks without threaded holes, you must install cage nuts in the locations specified in M320 Mounting Hole Locations for Four-Post Racks or Cabinets. To install the cage nuts:

1. On the front rack rails, install cage nuts in the holes specified for the large shelf and the spacer bars.
2. On the rear rack rails, install cage nuts in the holes specified for the small shelf.

Installing the Large Mounting Shelf for M320 Four-Post Racks or Cabinets

To install the large mounting shelf:

1. On the front of each front rack rail, partially insert a mounting screw into the lowest hole.
2. Install the large shelf on the front rack rails. Rest the bottom slot of each ear on a mounting screw.
3. Partially insert a mounting screw into the top hole in each ear of the large shelf.
4. Tighten all the screws completely.
5. The router is shipped with each spacer bar attached to the rear of each front-mounting flange. Remove each spacer bar by removing the seven screws that fasten the spacer bar to the front-mounting flange.
6. Place one of the spacer bars over an ear of the installed large shelf. Position the notch in the rear of the spacer bar so the upper part of the bar is flush with the rack rail and the lower part is flush with the ear of the shelf.
7. Insert a mounting screw into each of the nonthreaded holes in the recesses of the spacer bar to secure the spacer bar.
8. Repeat Steps 6 and 7 for the other spacer bar.
9. Tighten all the screws completely.

Installing the Small Mounting Shelf for M320 Four-Post Racks or Cabinets

1. On the back of each rear rack rail, partially insert a mounting screw into the lowest hole.
2. Install the small shelf on the back rack rails. Rest the bottom slot of each ear on a mounting screw. The small shelf installs on the back of the rear rails, extending toward the center of the rack. The bottom of the small shelf should align with the bottom of the large shelf.
3. Partially insert screws into the open holes in the ears of the small shelf.
4. Tighten all the screws completely.

Removing the Adjustable Center-Mounting Brackets for M320 Four-Post Racks or Cabinets

To remove the adjustable center-mounting brackets:

1. Loosen the three screws at the top and bottom of each bracket (see Figure 1).
2. Remove the center-mounting bracket.