Installing a JCS1200 Media Tray
Figure 1 shows how to install a media tray.
Figure 1: Installing a JCS1200 Media Tray
To install a media tray (see Figure 1):
- Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
- Make sure that the media tray release lever
is in the open position and the CompactFlash release buttons on the
CompactFlash disk are pushed into the in position.
Figure 2: Positioning the Release Lever and Button on the JCS1200 Media Tray
- Slide the media tray into position until it stops and locks into place.
- Rotate the media tray release lever to the closed position.
