Unpacking the M7i Router
The router is shipped in a cardboard carton, secured with foam packing material. The carton also contains an accessory box and the M7i Internet Router Installation Quick Start.
 | Note: The router is maximally protected inside the shipping carton. Do not unpack it until you are ready to begin installation. |
To unpack the router, perform these steps (see Figure 1):
- Move the shipping carton to a staging area as close to the installation site as possible, but where you have enough room to remove the system components.
- Position the carton so that the arrows are pointing up.
- Open the top flaps on the shipping carton.
- Remove the accessory box and verify the contents against the parts inventory on the label attached to the carton.
- Pull out the packing material holding the router in place.
- Verify the chassis components received against the packing list included with the router. A generic parts inventory appears in Verifying the M7i Router Parts Received.
- Save the shipping crate, packing materials, and pallet in case you later need to move or ship the router.
Figure 1: Unpacking the Router
