• Supported Platforms
• MX240 Routers

• Related Topics
• MX240 FPC Terminology
• Holding an MX240 FPC
• Replacing an MX240 FPC
• Tools and Parts Required to Replace MX240 Hardware Components

Storing an MX240 FPC

When not installed in the routers, FPCs must be either stored in the container in which a spare FPC is shipped or stored horizontally with the component-side up on a flat, stable surface. When you store an FPC on a horizontal surface or in the shipping container, always place it inside an antistatic bag. Because the FPC is heavy and because antistatic bags are fragile, inserting the FPC into the bag is easier with two people. The storage guidelines are as follows:

• When two people are storing an FPC, one person holds the FPC in the horizontal position with the faceplate facing their body, the other person slides the opening of the bag over the FPC connector edge.
• When one person is storing an FPC, you must insert the FPC into a bag by yourself. First lay the FPC horizontally on a flat, stable surface, component-side up. Orient the FPC with the faceplate facing you. Carefully insert the FPC connector edge into the opening of the bag, and pull the bag toward you to cover the FPC.

Caution: To prevent damage when storing FPCs: Never lay an FPC component-side down. Figure 1: Do Not Stack FPCs Never stack an FPC under or on top of any other component (see Figure 1).