Unpacking an EX4500 Switch
The EX4500 switches are shipped in a cardboard carton, secured with foam packing material. The carton has an accessory compartment and contains the quick start instructions.
 | Caution: EX4500 switches are maximally protected inside the shipping carton. Do not unpack the switches until you are ready to begin installation. |
To unpack the switch:
- Open the carton.
- Pull out the packing material holding the switch in place.
- Verify the parts received against the inventory on the label attached to the carton and listed in Table 1.
- Save the shipping carton and packing materials in case you need to move or ship the switch later.
Table 1: Inventory of Components Provided with an EX4500 Switch
Component | Quantity |
|---|---|
Switch | 1 |
Fan tray (preinstalled) | 1 |
Power supply (preinstalled ) | 1 AC |
AC power cord appropriate for your geographical location | 1 |
Power cord retainer clip | 1 |
Cover panels for slots without installed components |
|
Dust covers for ports | 40 |
Mounting brackets | 2 |
Mounting screws | 20 |
Rubber feet | 4 |
Accessory kit box | 1 |
Quick Start installation instructions | 1 |
Pub, Juniper Product ROHS and Warranty Document | 1 |
End User License Agreement | 1 |
Ethernet cable, RJ-45/RJ-45, 4-pair stranded UTP, category #5 | 1 |
RJ-45 to DB-9 serial port adapter | 1 |
 | Note: You must provide mounting screws that are appropriate for your rack to mount the chassis on a rack or a cabinet. |
