• Downloads
• Installing the SRX5600 Services Gateway Craft Interface    

• Related Topics
• Preventing Electrostatic Discharge Damage to the SRX5600 Services Gateway
• Tools and Parts Required to Replace SRX5600 Services Gateway Hardware Components
• Disconnecting the Alarm Relay Wires from the SRX5600 Services Gateway Craft Interface
• Removing the SRX5600 Services Gateway Craft Interface
• Connecting the Alarm Relay Wires to the SRX5600 Services Gateway Craft Interface

Installing the SRX5600 Services Gateway Craft Interface

To install the craft interface (see Figure 1):

2. Grasp the craft interface with one hand and hold the bottom edge of the craft interface with the other hand to support its weight.
3. Orient the ribbon cable so that it plugs into the connector socket. The connector is keyed and can be inserted only one way.
4. Align the bottom of the craft interface with the sheet metal above the card cage and press it into place.
5. Tighten the screws on the left and right corners of the craft interface faceplate.
6. Reattach any external devices connected to the craft interface.

Figure 1: Installing a Craft Interface