Removing the JCS1200 Cable Management Trays Without a Bezel
Figure 1 shows how to remove and install the cable management trays.
Figure 1: Removing and Installing the JCS1200 Cable Management Trays
The cable management trays can be removed with or without the JCS1200 bezel. If you are removing the bezel, see Removing a JCS1200 Bezel more information.
To remove the cable management trays that are installed without the JCS1200 bezel (see Figure 1):
- Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
- Hold the cable management tray with one hand and use a Phillips screwdriver to loosen the captured thumb screws that attach the cable management tray to the platform.
- Pull the cable management tray away from the platform.
- Repeat these steps for the other cable management tray.
