Removing the T320 Cable Management System
The cable management system is located below the FPC card cage. The cable management system weighs approximately 5 lb (2.3 kg).
To remove the cable management system:
- Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to an approved site ESD grounding point. See the instructions for your site.
- Using a 3/8-in. nut driver, unscrew the nuts on the corners of the cable management system.
- Grasp the bottom of the cable management system and pull it straight out from the studs on the front of the chassis.
