• Supported Platforms
• TX Matrix Routers

• Related Topics
• TX Matrix Switch-Card Chassis (SCC) Description
• TX Matrix Cable Management System Description
• Installing the TX Matrix Cable Shelf Assembly

Installing the TX Matrix Comb Panel Assembly

The comb panel assembly installs on the TX Matrix chassis. To install the comb panel assembly(see Figure 1):

1. Remove the comb panel assembly from the shipping crate.
2. Align the four captive screws on the comb panel assembly with the mounting holes at the top of the chassis (immediately above the TX-SIB card cage).
3. Starting with the top two screws, partially tighten each of the four screws.
4. Secure the comb panel assembly to the chassis by tightening each of the four screws.