• Supported Platforms
• MX960 Routers

• Related Topics
• Preventing Electrostatic Discharge Damage to an MX960 Router
• MX960 Cable Manager Description
• Verifying the Version of the MX960 Cable Manager

Replacing the MX960 Cable Manager

To remove the standard cable manager (see Figure 1):

1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
2. Using a 7/16-in. (11 mm) nut driver, unscrew the nuts on the corners of the standard cable manager.
3. Grasp the bottom of the standard cable manager, and pull it straight out from the studs on the front of the chassis.

To install the standard cable manager (see Figure 1):

1. Position the standard cable manager on the studs on the lower front of the chassis.
2. Insert the nuts on the corners in the standard cable manager onto the studs on the chassis.
3. Using a 7/16-in. (11 mm) nut driver, tighten the nuts securely.