• Supported Platforms
• MX480 Routers

• Related Topics
• Preventing Electrostatic Discharge Damage to an MX480 Router
• MX480 Cable Management Brackets
• Installing the MX480 Router Cable Management Bracket

Replacing the MX480 Cable Management Brackets

To remove the (see Figure 1):

1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
2. Loosen the captive screws on either side of the chassis.
3. Remove the cable management brackets.

To install the (see Figure 1):

1. Attach an electrostatic discharge (ESD) grounding strap to your bare wrist, and connect the strap to one of the ESD points on the chassis.
2. Position the on the front sides of the chassis.
3. Insert the tabs into the slots.
4. Tighten the screws completely.