• Downloads
• Disconnecting a Virtual Chassis Cable from an EX4200 Switch    

• Related Topics
• Connecting a Virtual Chassis Cable to an EX4200 Switch
• Understanding Virtual Chassis Hardware Configuration on an EX4200 Switch
• Understanding Virtual Chassis Components
• Planning the Virtual Chassis
• Virtual Chassis Ports Connector Pinout Information for EX4200 Switches

Disconnecting a Virtual Chassis Cable from an EX4200 Switch

If you need to disconnect an EX4200 switch from a Virtual Chassis configuration, you need to disconnect the Virtual Chassis cable from the Virtual Chassis ports (VCPs).

Ensure that you have the following parts and tools available:

• A cross-head screwdriver (provided in the uplink module kit)

To disconnect a Virtual Chassis cable from an EX4200 switch (see Figure 1):

1. Loosen the screws on the locking cover by using the cross-head screwdriver.
2. Slide the locking cover back.
3. Gently pull the release pull tab on the Virtual Chassis cable connector to release the lock holding the Virtual Chassis cable connector in the Virtual Chassis port.
4. Gently pull the Virtual Chassis cable connector out of the Virtual Chassis port.

Note: If you order Virtual Chassis cables separately, you must reuse the locking covers provided with the original cable or order Virtual Chassis cable locking covers also separately.