• Downloads
• Connecting the AX411 Access Point to the SRX Series Device    

• Related Topics
• AX411 Access Point Connection Overview
• Installing the AX411 Access Point Antennas
• Providing Power to the AX411 Access Point Using Power over Ethernet
• Providing Power to the AX411 Access Point Using the Power Supply

Connecting the AX411 Access Point to the SRX Series Device

To connect the AX411 Access Point to the SRX Series device:

1. Locate the port on the SRX Series device to which you are connecting the access point. We recommend that you use a port other than ge-0/0/0 unless you are using an advanced configuration. If you are providing power to the access point using Power over Ethernet (PoE), make sure that the port supports PoE.
2. Connect one end of a CAT5e or CAT6 Ethernet cable to the intended port on the SRX Series device.
3. Connect the other end of the cable to the Ethernet port on the access point.