Technical Documentation

SRX210 Services Gateway 3G ExpressCard Basic CLI Commands

Table 1 lists the basic CLI commands for operating the 3G ExpressCard on the SRX210 Services Gateway.

The 3G wireless interface uses the prefix cl in the syntax cl-slot-number/0/port number.

Table 1: SRX210 Services Gateway 3G ExpressCard Basic CLI Commands

Action	Command
Checks the status of the 3G ExpressCard.	show modem wireless interface cl-0/0/8 show interfaces terse
CDMA ExpressCards
Activates the CDMA ExpressCard IOTA — Activates Internet-based over air provisioning . Manual activation — Requires manual entry of the required information. OTASP — Activates over the air service provisioning.	request modem wireless activate request modem wireless activate iota cl-0/0/8 request modem wireless activate manual cl-0/0/8 msl MSL value mdn MDN value imsi IMSI value sid SID value nid NID value sip-user-id SIP ID sip-password SIP_PASSWORD request modem wireless activate otasp cl-0/0/8 dial-string calling number
GSM
Unlocks the GSM SIM.	request modem wireless gsm sim-unlock cl-0/0/8 pin
Unlocks the SIM automatically on reboot	set interfaces cl-0/0/ 8 cellular-options gsm-options sim-unlock-code
Recovers the SIM from the Pin Unlock Key (PUK) state When you attempt to unlock the SIM, if you enter a wrong PIN three times in a row, the SIM enters the PUK state.	request modem wireless gsm sim-unblock cl-0/0/8 puk puk numberpin new pin number Note: You must obtain the PUK value from your cellular service provider.
Changes the PIN on the SIM.	request modem wireless gsm change-pin cl-0/0/8 old-pin current pin new-pin new pin

For more information about configuring the 3G wireless interface, see JUNOS Software Interfaces and Routing Configuration Guide.