24-Port Gigabit Ethernet XPIM LEDs
The 24-Port Gigabit Ethernet XPIM has the LEDs listed in Table 1.
Table 1: 24-Port Gigabit Ethernet XPIM LED States
LED | Color | State | Description |
|---|---|---|---|
STATUS | Green | On | XPIM is online and functioning normally. |
Amber | On | XPIM is starting up, running diagnostics, or shutting down. | |
Red | On | XPIM has failed. | |
LINK/ACT | Green | On | Port is online. |
Off | Port is offline. | ||
Blinking | Port is receiving or sending data. | ||
N/A Note: This LED is not applicable on the non-PoE 24-Port XPIM. See Figure 1. | N/A | N/A | Not used on the non-PoE XPIM. |
PoE Note: Applicable on the PoE XPIM only. See Figure 2. | Green | On | Port is PoE enabled and online. |
Off | Port is offline. | ||
Blinking | Port is PoE enabled and receiving or sending data. | ||
SFP ports 20–23 Note: Each port has two LEDs in the shape of a triangle pointing toward the port. The left LED is link and the right is activity. | Link Green | On | Port is online. |
Off | Port is offline. | ||
Activity Green | Blinking | Port is receiving or sending data. | |
Off | Port might be on but is not receiving or sending data. |
Figure 1: 24-Port Gigabit Ethernet XPIM

Figure 2: 24-Port Gigabit Ethernet XPIM with PoE

Related Topics
- 24-Port Gigabit Ethernet XPIM Overview
- Key Features of the 24-Port Gigabit Ethernet XPIM
- 24-Port Gigabit Ethernet XPIM Hardware Specifications
- 24-Port Gigabit Ethernet XPIM Components
- Basic Configuration of the 24-Port Gigabit Ethernet XPIM
- Power over Ethernet Support on SRX Series Services Gateway Interfaces
