Note: The side of the switch where the network ports are located is the front of the switch.

EX4500-40F-FB

40-port GbE/10GbE SFP/SFP+

Front-to-back

• Chassis
• One fan tray (with green exhaust label visible)
• One AC power supply (with green ejector lever)
• One power cord
• One power supply cover panel
• Two uplink module cover panels
• One intraconnect module

EX4500-40F-BF

40-port GbE/10GbE SFP/SFP+

Back-to-front

• Chassis
• One fan tray (with orange intake label visible)
• One AC power supply (with orange ejector lever)
• One power cord
• One power supply cover panel
• Two uplink module cover panels
• One intraconnect module

EX4500-40F-FB- C (Converged Enhanced Ethernet (CEE) capable)

40-port GbE/10GbE SFP/SFP+

Front-to-back

• Chassis
• One fan tray (with green intake label visible)
• One AC power supply (with green ejector lever)
• One power cord
• One power supply cover panel
• Two uplink module cover panels
• One intraconnect module

EX4500-40F-BF-C (CEE capable)

40-port GbE/10GbE SFP/SFP+

Back-to-front

• Chassis
• One fan tray (with orange intake label visible)
• One AC power supply (with orange ejector lever)
• One power cord
• One power supply cover panel
• Two uplink module cover panels
• One intraconnect module

Note: The CEE capable EX4500 switches have a Virtual Chassis label on the front panel.

Note: Uplink modules and transceivers are not part of the EX4500 switch’s shipping configuration. If you want to purchase uplink modules, transceivers, or additional power supplies for your switch configuration, you must order them separately.

Caution: Mixing power supplies with front-to-back airflow and back-to-front airflow in the same chassis is not supported.