RJ-45 Connector Pinouts for the M10i Routing Engine MGMT Port
The port on the Routing Engine labeled MGMT is an autosensing 10/100-Mbps Ethernet RJ-45 receptacle that accepts an Ethernet cable for connecting the Routing Engine to a management LAN (or another device that supports out-of-band management). For more information, see M10i Routing Engine Interface Ports. Table 1 describes the RJ-45 connector pinout.
Table 1: RJ-45 Connector Pinout
Pin | Signal |
|---|---|
1 | TX+ |
2 | TX- |
3 | RX+ |
4 | Termination network |
5 | Termination network |
6 | RX- |
7 | Termination network |
8 | Termination network |
