RJ-45 Connector Pinouts for the AX411 Access Point Ethernet Port
The Ethernet port on the front panel is an autosensing 10/100/1000-Mbps Ethernet RJ-45 receptacle that accepts an Ethernet cable for connecting the access point to the SRX Series device that manages it.
Figure 1 shows the RJ-45 cable connector.
Figure 1: Ethernet Cable Connector (RJ-45)
Table 1 describes the RJ-45 connector pinouts for the ETHERNET port.
Table 1: RJ-45 Connector Pinouts for the Access Point Ethernet Port
Pin | Signal |
|---|---|
1 | TX+ |
2 | TX - |
3 | RX+ |
4 | PoE V+ |
5 | PoE V+ |
6 | RX — |
7 | PoE V- |
8 | PoE V- |
