RJ-45 Connector Pinouts for the AX411 Access Point Console Port
The console port on the front panel is an RJ-45 receptacle that accepts an RJ-45 cable for connecting the AX411 Access Point to the serial port on a laptop or desktop management workstation for diagnostics or troubleshooting.
Figure 1 shows the RJ-45 connector for the console port.
Figure 1: Console Cable Connector
Table 1 describes the RJ-45 connector pinouts for the CONSOLE port.
Table 1: RJ-45 Connector Pinouts for Access Point Console Port
Pin | Signal | Description |
|---|---|---|
1 | RTS | Request to Send |
2 | DTR | Data Terminal Ready |
3 | TXD | Transmit Data |
4 | Ground | Signal Ground |
5 | Ground | Signal Ground |
6 | RXD | Receive Data |
7 | DSR/DCD | Data Set Ready |
8 | CTS | Clear to Send |
