RJ-11 Connector Pinouts for the ADSL2+ Mini-Physical Interface Module
The ADSL2+ Mini-Physical Interface Module (Mini-PIM) uses an RJ-11 cable, which is not supplied with the Mini-PIM. Table 1 gives the RJ-11 connector pinouts.
Table 1: RJ-11 Connector Pinouts for the ADSL2+ Mini-PIM
Pin | Signal |
|---|---|
1 | No connect |
2 | No connect |
3 | RJ P-Tip |
4 | RJ N-Ring |
5 | No connect |
6 | No connect |
