Technical Documentation

• Download PDFs
• Network Port LEDs in an EX 8200 series Switch  

• Related Topics
• 48-port RJ-45 Line Card in an EX 8200 series Switch
• 48-port SFP Line Card in an EX 8200 series Switch
• 8-port SFP+ Line Card in an EX 8200 series Switch
• LCD Panel in an EX 8200 series Switch
• Line Card LEDs in an EX 8200 series Switch

Network Port LEDs in an EX 8200 series Switch

Each network port on the faceplate of a line card in an EX 8200 series switch has two LEDs.

Figure 1 shows the network port LEDs on a 48-port RJ-45 line card.

Figure 1: Network Port LEDs on a 48-port RJ-45 Line Card

Figure 2 shows the network port LEDs on a 48-port SFP line card. The LEDs point toward the port to which the LEDs belong.

Figure 2: Network Port LEDs on a 48-port SFP Line Card

Figure 3 shows the network port LEDs on an 8-port SFP+ line card.

Figure 3: Network Port LEDs on an 8-port SFP+ Line Card

The LEDs labeled Link/Activity in Figure 1, Figure 2, and Figure 3 indicate link activity.

Table 1 describes the Link/Activity LED.

Table 1: Network Port LEDs on Line Cards in an EX 8200 series Switch—Link/Activity LED

LED	Color	State and Description
Link/Activity	Unlit	The port is not active.
	Green	On steadily—The port and the link are active, but there is no link activity. Blinking—The port and the link are active, and there is link activity.

The LEDs labeled Status in Figure 1, Figure 2, and Figure 3 indicate the status of one of the three port parameters. The port parameters are administrative status, duplex mode, and speed.

Table 2 describes the Status LED. From the Idle menu of the LCD, use the Enter button on the LCD panel to toggle between the ADM, DPX, and SPD indicators.

Table 2: Network Port LEDs on Line Cards in an EX 8200 series Switch—Status LED

LED	LCD Indicator	State, Color, and Description
Status	LED: ADM	Indicates the administrative status (enabled or disabled). The status indicators are: Green—Port is enabled. Unlit—Port is disabled.
	LED: DPX	Indicates the duplex mode. The status indicators are: Green—Port is set to full-duplex mode. Unlit—Port is not set to full-duplex mode.
	LED: SPD	Indicates the speed. The speed indicators are different in the three line cards. The speed indicators for 48-port RJ-45 line cards are: Unlit—10 Mbps Green—Blinking—100 Mbps Green—On steadily—1000 Mbps The speed indicators for 48-port SFP line cards are: Unlit—Less than 1 Gbps Green—1 Gbps The speed indicators for 8-port SFP+ line cards are: Unlit—Less than 10 Gbps Green—10 Gbps