Network Port LEDs in an EX8200 Switch
Each network port on the faceplate of a line card in an EX8200 switch has two LEDs.
Figure 1 shows the network port LEDs on an 8-port SFP+ line card.
Figure 1: Network Port LEDs on an 8-port SFP+ Line Card
Figure 2 shows the network port LEDs on a 40-port SFP+ line card. The LEDs point toward the port to which the LEDs belong.
Figure 2: Network Port LEDs on a 40-port SFP+ Line Card
Figure 3 shows the network port LEDs on a 48-port SFP line card. The LEDs point toward the port to which the LEDs belong.
Figure 3: Network Port LEDs on a 48-port SFP Line Card
Figure 4 shows the network port LEDs on a 48-port RJ-45 line card.
Figure 4: Network Port LEDs on a 48-port RJ-45 Line Card
The LEDs labeled Link/Activity in Figure 1, Figure 2, Figure 3, and Figure 4 indicate link activity.
Table 1 describes the Link/Activity LED.
Table 1: Network Port LEDs on Line Cards in an EX8200 Switch—Link/Activity LED
LED | Color | State and Description |
|---|---|---|
Link/Activity | Green |
|
The LEDs labeled Status in Figure 1, Figure 2, Figure 3, and Figure 4 indicate the status of one of the three port parameters. The port parameters are administrative status, duplex mode, and speed.
Table 2 describes the Status LED. From the Idle menu of the LCD, use the Enter button on the LCD panel to toggle between the ADM, DPX, and SPD indicators.
Table 2: Network Port LEDs on Line Cards in an EX8200 Switch—Status LED
LED | LCD Indicator | State, Color, and Description |
|---|---|---|
Status | LED: ADM | Indicates the administrative status (enabled or disabled). The status indicators are:
|
LED: DPX | Indicates the duplex mode. The status indicators are:
| |
LED: SPD | Indicates the speed. The speed indicators are different in the line cards. The speed indicators for 8-port SFP+ line cards are:
The speed indicators for 40-port SFP+ line cards are:
The speed indicators for 48-port SFP line cards are:
The speed indicators for 48-port RJ-45 line cards are:
|
