Technical Documentation

Management Port LEDs in EX8200 Switches

The management port on EX8200 switches has two LEDs that indicate link/activity and port status (see Figure 1). The management port is set to full-duplex and the speed is set to 100 Mbps.

Figure 1: LEDs on the Management Port on an EX8200 Switch

Image g020402.gif

Table 1 describes the Link/Activity LED.

Table 1: Link/Activity LED on the Management Port on an EX8200 Switch

LED

Color

State and Description

Link/Activity

Green

  • Blinking—The port and the link are active, and there is link activity.
  • On steadily—The port and the link are active, but there is no link activity.
  • Off—The port is not active.

Table 2 describes the Status LED (administrative status).

Table 2: Status LED on the Management Port on an EX8200 Switch

LED

Color

State and Description

Status

Green

  • On steadily—Administrative status is enabled.
  • Off—Administrative status is disabled.

Published: 2010-02-01