Network Port Connector Pinout Information for an EX3200 or EX4200 Switch
A network port on an EX3200 or EX4200 switch uses an RJ-45 connector to connect to a device.
The port uses an autosensing RJ-45 connector to support a 10/100/1000Base-T connection. Two LEDs on the port indicate link/activity on the port and the port status. See Network Port LEDs in EX3200 and EX4200 Switches.
Table 1 provides the pinout information for the RJ-45 connector. An RJ-45 cable, with a connector attached, is supplied with the switch.
Table 1: Network Port Connector Pinout Information for an EX3200 or EX4200 Switch
Pin | Signal | Description |
|---|---|---|
1 | TRP1+ | Transmit/receive data pair 1 Negative Vport (in PoE models) |
2 | TRP1- | Transmit/receive data pair 1 Negative Vport (in PoE models) |
3 | TRP2+ | Transmit/receive data pair 2 Positive Vport (in PoE models) |
4 | TRP3+ | Transmit/receive data pair 3 |
5 | TRP3- | Transmit/receive data pair 3 |
6 | TRP2- | Transmit/receive data pair 2 Positive Vport (in PoE models) |
7 | TRP4+ | Transmit/receive data pair 4 |
8 | TRP4- | Transmit/receive data pair 4 |
