48-port RJ-45 Line Card in an EX8200 Switch
The line cards in EX8200 switches combine a Packet Forwarding Engine and Ethernet interfaces on a single assembly. They are field-replaceable units (FRUs) that can be installed in the line card slots on the front of the switch chassis. The line cards are hot-insertable and hot-removable: You can remove and replace them without powering off the switch or disrupting switch functions.
EX8200 switches use four types of line cards:
- 8-port SFP+ line card
- 40-port SFP+ line card
- 48-port SFP line card
- 48-port RJ-45 line card
You can use any combination of line cards in an EX8200 switch.
The 48-port RJ-45 line card for EX8200 switches (see Figure 1) has 48 10/100/1000 Gigabit Ethernet ports with RJ-45 connectors on the faceplate. Each port has two LEDs. See Network Port LEDs in an EX8200 Switch.
Figure 1: 48-port RJ-45 Line Card
The line card has two status LEDs labeled ON and ST on the faceplate that indicate the online and status information for the line card. See Line Card LEDs in an EX8200 Switch.
