Technical Documentation

Field-Replaceable Units in an EX8208 Switch

Field-replaceable units (FRUs) are switch components that you can replace at your site. The switch uses these types of FRUs:

  • Hot-insertable and hot-removable—You can remove and replace these components without powering off the switch or disrupting the switching function.
  • Hot-pluggable—You can remove and replace these components without powering off the switch, but the switching function is interrupted until you replace the component.

Table 1 lists the FRUs for the EX8208 switch and their types.

Table 1: FRUs in an EX8208 Switch

FRU

Type

Power supplies

Hot-insertable and hot-removable.

Fan tray

Hot-insertable and hot-removable.

Switch Fabric and Routing Engine (SRE) module

Redundant configuration:

  • Master SRE module is hot-pluggable.
  • Backup SRE module is hot-insertable and hot-removable.

Base configuration:

See EX8208 Switch Configurations.

Switch Fabric (SF) module

Redundant configuration:

  • SF module is hot-insertable and hot-removable.

Base configuration:

See EX8208 Switch Configurations.

8-port SFP+ line card

40-port SFP+ line card

48-port SFP line card

48-port RJ-45 line card

Hot-insertable and hot-removable.

We recommend that you take the line cards offline before removing them. See Removing a Line Card from an EX8200 Switch.

SFP and SFP+ transceivers

Hot-insertable and hot-removable.

Note: Line cards are not part of the base or redundant configuration. You must order them separately.

Note: If you have a Juniper J-Care service contract, register any addition, change, or upgrade of hardware components at https://www.juniper.net/customers/csc/management/updateinstallbase.jsp. Failure to do so can result in significant delays if you need replacement parts. This note applies if you add a new type of line card. It does not apply if you replace these components with the same type of component.


Published: 2010-06-30

Help
|
My Account
|
Log Out