- Downloads
- Front Panel of an EX2200 Switch
- Related Topics
- Chassis Status LEDs in EX2200 Switches
- Network Port and Uplink Port LEDs in EX2200 Switches
- Network Port Connector Pinout Information for an EX2200 Switch
- Rear Panel of an EX2200 Switch
- Installing a Transceiver in an EX Series Switch
- Removing a Transceiver from an EX Series Switch
- Installing and Connecting an EX2200 Switch
Front Panel of an EX2200 Switch
The front panel of an EX2200 switch consists of the following components:
- Network ports—depending on the switch model, either
of:
- 24 or 48 10/100/1000Base-T Gigabit Ethernet ports, with Power over Ethernet (PoE) not available in EX2200-24T and EX2200-48T
- 24 or 48 10/100/1000Base-T Gigabit Ethernet ports, with Power over Ethernet (PoE) available in EX2200-24P and EX2200-48P
- 4 built-in SFP uplink ports
- 2 chassis status LEDs
- 4 port status mode LEDs
- Mode button
Figure 1 shows the front panel of an EX2200 switch with 48 Gigabit Ethernet ports. Figure 2 shows the front panel of an EX2200 switch with 24 Gigabit Ethernet ports.
Figure 1: Front Panel of an EX2200 Switch with 48 Gigabit Ethernet Ports
Figure 2: Front Panel of an EX2200 Switch with 24 Gigabit Ethernet Ports
