Technical Documentation

Parts Inventory (Packing List) for an EX8208 Switch

The switch shipment includes a packing list. Check the parts you receive in the switch shipping crate against the items on the packing list. The packing list specifies the part number and description of each part in your order. The parts shipped depend on the configuration you order. See EX8208 Switch Configurations for more information.

If any part on the packing list is missing, contact your customer service representative or contact Juniper customer care from within the U.S. or Canada by telephone at 1–800–638–8296. For international-dial or direct-dial options in countries without toll-free numbers, see http://www.juniper.net/support/requesting-support.html.

Note: All line cards ordered are shipped separately. Line cards are not listed on the switch’s packing list.

Note: The base configuration is available only with AC power supplies. The redundant configuration ships with either AC or DC power supplies.

Table 1 lists the parts and their quantities in the packing list for a base configuration and a redundant configuration switch.

Table 1: Parts List for Different EX8208 Switch Configurations

Component

Base Configuration Quantity

Redundant Configuration Quantity

Chassis, including the backplane and front-mounting brackets

1

1

Switch Fabric and Routing Engine (SRE) module

1

2

Switch Fabric (SF) module

1

1

Power supplies

2 AC

6 AC or 4 DC

Power supply cords

2 (1 per power supply)

6 (1 per AC power supply)

Fan tray

1

1

Cover panels for slots without installed components
  • Line card cover panels: 8
  • SRE module cover panel: 1
  • Power supply cover panels: 4
  • Line card cover panels: 8

Table 2 lists the parts contained in the accessory box. The same accessories ship with both configurations of the switch.

Table 2: Accessory Box Parts List

Component

Quantity

Label, accessories contents

1

Accessory kit box

1

Quick Start installation instructions

1

Left front adjustable mounting bracket

1

Right front adjustable mounting bracket

1

Rear adjustable mounting brackets

2

Screws to connect the front pieces and rear pieces of the adjustable mounting brackets for four-post rack installation.

Each bracket consists of a front piece and a rear piece. Six screws connect the front-and-rear pieces of each of the two adjustable mounting brackets.

12

Power cord tray

1

Velcro tie-wraps for power cord tray

12

Power cord retainers

6

Juniper Networks Product Warranty

1

End User License Agreement

1

Juniper Compliance Form Letter, RoHS Worldwide

1

Ethernet cable, RJ-45/RJ-45, 4-pair stranded UTP, category #5

1

RJ-45 to female DB-9 cable, to connect to the switch's console port using a management PC's serial port

1

ESD grounding strap

1

Note: You must provide mounting screws that are appropriate for your rack to front-mount the chassis on a rack or a cabinet.

For two-post rack installation, you need 28 screws: 24 screws to attach the front-mounting bracket “ears” that come installed on the chassis to the front of the rack and 4 screws to install the power cord tray. (The power cord tray is mandatory for two-post rack installation.)

For four-post rack installation, you need either 40 or 44 screws: 24 screws to attach the front-mounting bracket “ears” that come installed on the chassis to the front of the rack, 16 screws to attach the adjustable mounting brackets to the rack, and 4 screws if you install the optional power cord tray.

Published: 2009-10-08