AC Power Cord Specifications for EX2200 Switches
Detachable AC power cords are supplied with the switch. The coupler is type C13 as described by International Electrotechnical Commission (IEC) standard 60320. The plug at the male end of the power cord fits into the power source outlet that is standard for your geographical location.
 | Caution: The AC power cord for the switches is intended for use with that switch only and not for any other use. |
 | Note: In North America, AC power cords must not exceed 4.5 meters (approximately 14.75 feet) in length, to comply with National Electrical Code (NEC) Sections 400-8 (NFPA 75, 5-2.2) and 210-52 and Canadian Electrical Code (CEC) Section 4-010(3). The cords supplied with the switch are in compliance. |
Table 1 lists AC power cord specifications provided for each country or region.
Table 1: AC Power Cord Specifications
Country/Region | Electrical Specifications | Plug Standards |
|---|---|---|
Australia | 250 VAC, 10 A, 50 Hz | AS/NZ 3112 |
China | 250 VAC, 10 A, 50 Hz | GB2099 and GB1002 |
Europe (except Italy, Switzerland, and United Kingdom) | 250 VAC, 10 A, 50 Hz | CEE (7) VII |
Italy | 250 VAC, 10 A, 50 Hz | CEI 23-16 |
Japan | 125 VAC, 12 A, 50 Hz or 60 Hz | JIS C8303 |
North America | 125 VAC, 13 A, 60 Hz | NEMA 5-15 |
Switzerland | 250 VAC, 10 A, 50 Hz | SEV 1011 SEV 6534/2 |
United Kingdom | 250 VAC, 10 A, 50 Hz | BS 1363/A |
Figure 1 illustrates the plug on the power cord for each country or region listed in Table 1.
Figure 1: AC Plug Types
