Tools and Parts Required for Replacing TX Matrix Components
To replace hardware components, you need the tools and parts listed in Table 1.
Table 1: Tools and Parts Required for Component Replacement
Tool or part | Components |
|---|---|
7/16-in. (11 mm) nut driver or socket wrench | Power cables Power supply |
Blank panels (if component is not reinstalled) | TX-CB Routing Engine TX-SIB |
Dust covers | Fiber-optic array cables |
Electrostatic bag or antistatic mat | TX-CB Routing Engine TX-SIB |
Electrostatic discharge (ESD) grounding wrist strap | All |
Small slotted screwdriver, at least 4 in. long | Fiber-optic array cables |
Flat-blade (–) screwdriver, 2.5 mm | Serial cable to AUXILIARY or CONSOLE Routing Engine ports |
Phillips (+) screwdriver, number 1 | Craft interface |
Phillips (+) screwdriver, number 2 | Air filter (front or rear) Cables and connectors TX-CB TX-CIP Fan tray (front or rear) Power supply Routing Engine TX-SIB |
Wire cutters | Power cables Power supply |
