• Supported Platforms
• TX Matrix Routers

• Related Topics
• Connecting Power to the Two-Input 160-A Power Supplies in a TX Matrix Router
• Connecting Power to a Three-input 240-A Power Supply In 2-INPUT Mode in a TX Matrix Router

Tools and Parts Required for Connecting the TX Matrix Router to Power

To connect the TX Matrix router to power, and to power on the TX Matrix router, you need the following tools and parts:

• 7/16-in. (11 mm) nut driver, with a minimum of 23 lb-in. (2.6 Nm) and 25 lb-in. (2.8 Nm) tightening torque, for tightening nuts to terminal studs on each power supply
• Wire cutters
• Electrostatic discharge (ESD) grounding wrist strap