Tools and Parts Required to Replace TX Matrix Plus Hardware Components
To replace hardware components, you need the tools and parts listed in Table 1.
Table 1: Tools and Parts Required for Component Replacement
Components | Tool or part |
|---|---|
All | Electrostatic discharge (ESD) grounding wrist strap |
Power cables Power supply | 7/16-in. (11 mm) nut driver or socket wrench Phillips (+) screwdriver, number 2 |
TXP-CB | Electrostatic bag or antistatic mat |
Routing Engine | Electrostatic bag or antistatic mat |
TXP-F13 SIB | Phillips (+) screwdriver, number 2 Blank panels (if component is not reinstalled) Electrostatic bag or antistatic mat |
Fiber-optic array cables | Dust covers |
Craft interface | 5/16 in. nut driver |
Air filter | Phillips (+) screwdriver, number 2 |
TXP-CIP | Phillips (+) screwdriver, number 2 |
Fan tray (front or rear) | Phillips (+) screwdriver, number 2 |
