Tools and Parts Required for Connecting the TX Matrix Plus Router to Ground and Power
To connect the TX Matrix Plus router to ground and power, you need the following tools:
- 7/16-in. (11 mm) nut driver, with a minimum of 23 lb-in.
(2.6 Nm) and 25 lb-in. (2.8 Nm) tightening torque,
for tightening nuts to terminal studs on each power supply.
Caution: You must use an appropriate torque-controlled tool to tighten the nuts. Applying excessive torque damages the terminal studs and power supply. The maximum torque that may be applied to this nut is 25 in-lb (2.8 Nm).
- Phillips (+) screwdriver, number 2
