- Related Topics
- Field-Replaceable Units on the SRX3600 Services Gateway
- Replacing the Fan Tray on the SRX3600 Services Gateway
- Replacing the Air Filter on the SRX3600 Services Gateway
- Replacing the Switch Fabric Board on the SRX3600 Services Gateway
- Replacing a Routing Engine on the SRX3600 Services Gateway
- Replacing a Network Processing Card on the SRX3600 Services Gateway
- Replacing a Services Processing Card on the SRX3600 Services Gateway
- Replacing an I/O Card on the SRX3600 Services Gateway
- Replacing an AC Power Supply on the SRX3600 Services Gateway
- Replacing a DC Power Supply on the SRX3600 Services Gateway
Required Tools and Parts for Replacing Hardware Components on the SRX3600 Services Gateway
To replace hardware components, you need the tools and parts listed in Table 1.
Table 1: Tools and Parts Required
Tool or part | Components |
|---|---|
3/8-in. nut driver or pliers | Cables and connectors DC power supply |
Blank panels (if component is not reinstalled) | SFB IOC SPC NPC Power supply Routing Engine |
Electrostatic bag or antistatic mat | SFB IOC SPC NPC Routing Engine SFP and XFP Transceivers |
Electrostatic discharge (ESD) grounding wrist strap | All |
Flat-blade (–) screwdriver | Cables and connectors IOC |
Phillips (+) screwdrivers, numbers 1 and 2 | Air filter Fan tray Routing Engine SFB IOC SPC NPC Cables and connectors |
Rubber safety cap | IOC SFP and XFP Transceivers |
Wire cutters | Cables and connectors DC power supply |
