- Related Topics
- General Site Installation Guidelines for the SRX650 Services Gateway
- SRX650 Services Gateway Cabinet Size and Clearance Requirements
- Site Preparation Checklist for the SRX650 Services Gateway
- SRX650 Services Gateway Spacing of Mounting Bracket and Flange Holes
- Connecting the SRX650 Services Gateway to the Building Structure
SRX650 Services Gateway Rack Size and Strength Requirements
When installing the services gateway in a rack, you must ensure that the rack complies with a 2U (19 in or 45.6 cm) rack as defined in Cabinets, Racks, Panels, and Associated Equipment (document number EIA-310-D) published by the Electronics Industry Association (http://www.eia.org).
When selecting a rack, ensure that the physical characteristics of the rack comply with the following specifications:
- The outer edges of the mounting brackets extend the width of the chassis to 19 in (45.6 cm).
- The front of the chassis extends approximately 0.5 in (1.27 cm) beyond the mounting ears.
