Tools and Parts Required for Replacing T1600 DC Power System Components
To replace a DC power supply, you need the following tools and equipment:
- Phillips (+) screwdriver, number 2
- ESD wrist strap with cable
- 7/16-in. (11 mm) nut driver
Caution: You must use an appropriate torque-controlled tool to tighten the nuts. Applying excessive torque damages the terminal studs and the power supply. The absolute maximum torque that may be applied to this nut is 45 in-lb (5.0 Nm).
- Wire cutters
- Flashlight
- Flat-blade (–) screwdriver
